Monday, 8 September 2014

Shine brightly

Well its Trace here and I have gone all festive as I prepare for impending craft fairs my thoughts have gone all festive so for today's make I have created a lantern using one of Tim Holtz dies from last year that I never had a play with. So here goes :

here it is , shimmering and frosty in the sunlight


And here it is complete with glow from the tiny battery operated tea light .


I have tried to create a frosty feel and here are the details of how I put this together. I started by cutting all the pieces from a kraft card . For the inside panels I used the new frosty sheets from Tim Holtz . ( The box that comes with the die has great instructions for assembling this inside...which tells you where to add tape etc .)


When you cut out the die it cuts out the window shapes and I used on of the as a template to trim my frosty sheets for the four windows.


I then assembled the lantern gluing and folding as per the instructions in the box... (This did teach me I am a messy and less than patient crafter! )


I then added drips of glossy accents and sprinkled with rock candy distress glitter to create some frosty effects. i left to dry until the glossy accents was completely dry.


Then for an extra frosty feel I added some spritzed picket fence distress marker.



Hopefully the photo shows this ...


Next to decorate I used festive strip die and die cut some holly leaves, berries and foliage using kraft core cardstock, which has a great texture to it too. Then to give a frosty. snowy feel I added some picket fence paint dabber to my craft sheet, dipped a mini blending tool in it and gently dabbed over the die cut pieces.



Here they are glued into place and hopefully the frosty effect can be seen...but for once the sun was shining!

And here it is all aglow...love the shadows that are cast and how it lights up the roof of the lantern...

  And here in semi darkness...

Well I have plenty more ideas for these with vintage themes and some Halloween ones seem to be calling!


keep those fingers inky!
see you later in the month x
trace x

Saturday, 6 September 2014

Winter candle

Hi everyone, Amanda here again, this time to share one of my favourite techniques - decorating a candle by melting a tissue paper design into the surface.  For this project I've used inks and a die, but you can also stamp a design onto the tissue paper.  Once decorated, keep your candle in a cool place, out of direct sunlight.  As well as the kit from the shop, you'll need a plain white candle, white tissue paper, greaseproof paper, and a soft cloth.  I hope you like it!


First I mixed peeled paint and vintage photo distress inks together on a craft sheet and misted with water.  Then I laid some tissue paper in the ink.



Next I put some black soot distress ink on the sheet, misted with water and dragged the still wet tissue paper through it before setting aside to dry.  If you're in a hurry, you can dry it with your heat gun.


I folded the tissue paper in half and die cut 4 double thickness mini pine trees.  I dabbed the trunks onto the vintage photo ink pad, then sprayed with water to blend and let dry.



To make a wintery sun, I dabbed a little spiced marmalade distress ink onto my craft sheet, misted with water and laid more tissue paper in.  Once dry, I die cut a small circle.

Next, I melted the trees and sun onto the candle.  I laid each one in place and smoothed flat, then wrapped tightly with a piece of greaseproof paper.  I gently heated the design with a heat gun until the wax just melted through - you can see when this happens, as the colour of your design shows more brightly through the greaseproof paper, as in the centre of the tree here:



For best results use a new piece of greaseproof paper for each shape, to avoid a build up of wax  that can make the surface lumpy.  Take care not to keep heating once the colour changes, and peel the greaseproof paper away quickly and carefully.  Before the wax hardens again, buff the surface with a soft cloth to smooth it out.



Once all the tissue trees and the sun were melted into place, I applied streaks of chipped sapphire and spiced marmalade distress inks and midnight rendezvous glimmer glaze with a cloth to get a pale wintery sky.  Excess colour can be removed either by polishing with a cloth, or with a little blending solution.  Finally, I added a little frosting on the trees using Stickles diamond and silver glitter glues.




Thanks for reading, and happy crafting!

Amanda

Thursday, 4 September 2014

A nautical theme…

Our sister blog, Country View Challenges, has a fabulous theme this month of N'autical' so I thought I’d make a sea-faring card for you today to demonstrate the beautiful Spellbinders’ Anchor die as well as a few other items…

NauticalBlues09

Starting with plain white card cut to the appropriate size, I misted it and sprayed two blue Dylusions inks onto it and moved the card around to blend them. I then used the TST Antique clock mask to water bleach the shape of it:
NauticalBlues01

Then came the arrows layering stencil and Picket fence DP before edging with Black soot DI:
NauticalBlues02 NauticalBlues03

Mounted onto white and then black and added to the card blank, this was the picture canvas:
NauticalBlues04 NauticalBlues05

Words were stamped here and there with black archival ink:
NauticalBlues07

I used the same technique to colour another piece of card and then cut out the anchor using this gorgeous Spellbinders die. The anchor was mounted onto a globe from one of Tim's ephemera packs. The card was finished with a bow of black American seam binding with a charm pinned to it:
NauticalBlues06 NauticalBlues08

Top:
NauticalBlues10

Bottom:
NauticalBlues11

Complete:
NauticalBlues13

I find I'm creating more and more backgrounds myself, from scratch. Yes, of course it's lovely to reach for a paper stack and use it but few of us have designs covering every topic we want to craft about. Stencils, masks and stamps are so very versatile lending themselves to so many uses for various topics. When I bought the arrows stencil I had no idea it would end up being used for a nautical theme, lol.

I hope you enjoyed your visit, thanks for stopping by. There'll be another project on Saturday, from Amanda.

Have a great day!  >:o)

Chris xxx